Bubble CPAP System Gold Series comes without compressor which can deliver high flows of Air or Oxygen ranging from 1 to 15 MP.
Clinical studies have proven the usefulness of high flow of gases when warmed at body temperature and humidified up to 99 to 100% relative humidity and delivered through nasal cannula.
Heat and Humidity prevents airway water loss, airway cooling, thickened secretions, nasal irritation & bleeding.
Bubble CPAP System allows delivery of breathing gases heated to body temperature & at nearly 100% relative humidity by nasal cannula without drying or cooling the airways, which has not possible in the conventional bubble humidifiers.
Most respiratory diseases of the neonate occur as a result of the immaturity of the premature neonate’s lungs. The respiratory system is underdeveloped and adequate gas exchange does not tale place naturally , with this there is a need for providing external respiratory support.
Bubble CPAP System effectively maintains Functional Residual Capacity(FRC) Most lungs diseases that lead to respiratory failure are commonly associated with a reduced FRC. Maintaining FRC is very important to premature neonates who have a greater tendency of airway closure when FRC falls below closing volume.
Bubble CPAP System helps to reduce the infant’s Work Of Breathing (WOB). There is a decrease in infant’s minute volume and respiratory rate with Bubble CPAP System. Chest vibrations are caused by the pressure oscillations from the bubbling. These pressure oscillations are reverberated back into the infant’s airway and may provide an alternate form of gas exchange through the principle of faciliated diffusion.
Bubble CPAP System comes with compact gas mixer for air and oxygen (Tubeless Construction).
The Range steps less 21% to 100 % of oxygen. Inlet for gas pressure is 50 psi.
Integrated flowmeter unit with range from 0~15I/min.
It has alarm system for gas supply drop and comes with unique Design and easy to use.
The Integrated pole assembly is available for mounting all the items.
The Respiratory humidifier with humidification chamber.
Technical Specification :-
Input flow range : 4 ~ 15 Ipm
FiO2 : 21 ~ 100%
Set CPAP Pressure Range : 3 ~10 cm H2O
Maximum Pressure Limit : 17 cm H2O at 8 Ipm
Operating Temerature Range : 18~26 O Storage
Temperature Range : -10 ~ 50 OC
Power Requirments : 220 VAC, 50/60 Hz
Air compressor, Oxygen Analyser.
Flowmeter unit with needle valves for Air & Oxygen and can be used as sn option for blender.
Delivery system (includes Humidification Chamber, Pressure relief manifold, single heater patient circuit, Gas supply line).
Patient interface includes nasal prong, nasal tubing's & infant Bonnets.
We are Manufacturer, Exporters and Suppliers of Bubble CPAP System Gold Series at wholesale competitive prices from India.
Key Tags: Neonatal Bubble CPAP Systems